Zetasizer Nano S90

An entry level system for the measurement of particle and molecular size at a 90 degree scattering angle using Dynamic Light Scattering, and molecular weight using Static Light Scattering.

The Zetasizer Nano S90 is the perfect lower cost solution when the ultimate in sizing sensitivity is not necessary, or where identical results to a legacy system with 90 degree scattering optics are required.

  • Size measurement from 0.3nm (diameter) to 5 microns using 90 degree scattering optics.
  • Molecular weight measurement down to 9,800Da.
  • A ‘Quality Factor’ and ‘Expert Advice System’ gives the confidence of having an expert at your shoulder.
  • 21CFR part 11 software option enables compliance with ER/ES.
  • Research software option gives access to further features and analysis algorithms for the light scattering specialist.
  • Automation of measurements using an autotitrator option.
  • Alternative laser, 50mW at 532nm for samples incompatible with the standard 633nm laser fitted.
  • Optical filter option to improve measurements with fluorescent sample.
  • Temperature range extension option to 120°C.
  • Systems can be upgraded to add zeta potential at a later date.

Accessories

The MPT-2 is an accessory for the Zetasizer Nano that provides extensive automation for a number of measurements that are routinely required when characterizing the size and zeta potential of dispersed particles and molecules.

Both the size and zeta potential can be measured in sequence as part of the automated titration.

pH is one of the main influences of the zeta potential of materials, so measuring zeta potential as a function of pH, and the determination of the isoelectric point are often required. Automating this improves productivity by proving a complete measurement using a stored method.

Conductivity is also measured, and automation can speed up the determination of whether ions in a formulation are specifically or non-specifically bound.

The same automation can be extended to study the effect of the concentration of additives such as surfactants and polyelectrolytes, and there is a dilution function to study the effect of dilution on the size and zeta potential of the sample.

The Zetasizer NanoSampler can accommodate up to 96 sample vials, accurately delivering up to 3 sequential aliquots of each sample into the Zetasizer Nano for automated particle size or molecular size measurements. All operation remains within the easy-to-use Zetasizer software using the simple Standard Operating Procedure (SOP) interface. The NanoSampler is delivered complete with the software, analysis cell and fittings to attach to the Zetasizer Nano instrument.