Dryblock Calibrators

Series TECAL Entry for thermostat test UPI for an automatically loop calibration of sensors stationary and mobile applicable odorless operation maintenance-free more riskless handling as fluidised baths quick reaktion during temperature cycles bronze- or aluminium core also with multiple borings Software and sensor interface for a fully automatic calibration

Techne Tecal with CalSoft

type	min. temp. [°C]	max. temp. [°C]	temp. stability [°C]	accuracy [°C]	Datasheets
140S	- 40	+ 140	±0,05	± 0,3
140H	- 40	+ 140	±0,05	± 0,3
425S	+ 40	+ 425	±0,05	± 0,3
425H	+ 40	+ 425	±0,05	± 0,3
650S	+ 45	+ 650	±0,09	± 0,4
650H	+ 45	+ 650	±0,09	± 0,4
140F	- 40	+ 140	±0,05	± 0,3
425F	+ 40	+ 425	±0,05	± 0,3
650F	+ 45	+ 650	±0,09	± 0,4
700X	+ 45	+ 700	±0,03	± 0,25
1200S	+ 150	+ 1200	±3	± 0,2
Optional accessory:
Calsoft	Software for a PC supported calibration incl. RS232 cabel
CH 5	external chiller for TECAL 140, Tecal 140F and 650F
	carrying bag, suitcase, calibrator certificate
only for Tecal H series:
UPI	User Probe Interface	The UPI enables sensors to calibrate without any operator interaction by "Closed Loop Calibration" connection direct to the calibrator.

CH-5 Kühler / Chiller	Technical Data
The CH-5 Chiller Unit is designed for use in conjunction with the TECAL 140 Calibrators to achieve calibration temperatures down to -40°C. In normal ambient temperatures of up to 20°C the minimum temperature obtainable with the TECAL models 140 is 45°C below ambient; by artificially cooling the heatsink of the units with water from the chiller -40°C can be obtained. The unit is designed to run on distilled or deionised water. The CH-5 can also be used to pass cooling water through the cooling coil on the Calibration Baths (LCB) and Cooling Probe (FDBOOCP) minimum temperature +10°C. A Refrigeration Control Pack (FCPID) can be supplied fitted to any Techne Refrigerated Bath. The Control Pack will turn the Refrigeration unit "On" or "off" when required following a signal from the TU-20D/TU-20HT thermoregulator when used in conjunction with Thermsoft software.	Working temperature range	4°C to 15°C
	Cooling capacity	400W
	Temperature control	Thermostat on/off
	Electrical control	Manual
	Length	430mm
	Width	235mm
	Height (including pump)	524mm
	BATH OPENING:
	Length	300mm
	Width	140mm
	Bath Depth	150mm
	Bath Capacity	5 litres
	Pump Capacity	20 litres/minute
	Net Weight	26.5kg

Technical Data    UPI
probe	type	resolution	accuracy	range	Techne Tecal with UPI interface
K	t/c	0.1°C	±0.5°C or 0.3%	-50 to 650°C
J	t/c	0.1°C	±0.5°C or 0.3%	-50 to 650°C
N	t/c	0.1°C	±0.5°C or 0.3%	-50 to 650°C
T	t/c	0.1°C	±0.5°C or 0.3%	-50 to 400°C
E	t/c	0.1°C	±0.5°C or 0.3%	-50 to 650°C
100 Ohm	RTD	0.1°C	±0.3°C or 0.1%	-50 to 650°C
1000 Ohm	RTD	0.1°C	±0.3°C or 0.1%	-50 to 650°C
0-10	mA	1.0uA	±2.0uA or ±0.002mA	0 to 10mA
10.1 to 20	mA	1.0uA	±2.0uA or ±0.002mA	10.1 to 20mA