|
Vectrino II
The Vectrino II profiling Velocimeter provides new and unique opportunities for laboratory
and field velocity measurements. While maintaining the sleek design of the single-point
Vectrino, the new instrument includes a complete set of new hardware, firmware, software.
A targeted instrument design makes this miniature current profiler very well suited for
high resolution boundary layer observations and for estimation of turbulence parameters.
|
|
|
System:
- Acoustic Frequency: 10 MHz
Velocity:
- Velocity range: 0.01 m/s in increments of 0.01 m/s to maximum of 3.0 m/s
- Velocity accuracy: ±0.5% of measured value ±1 mm/s
- Sampling Rate: 100 Hz
Sampling Volume:
- Profile Range: 3 cm
- Location: 4 – 7 cm from probe
- Diameter: 6 mm
- Min cell size: 1 mm
Data Communication:
- I/O: RS-485 (comes with high speed RS-485-to-USB converter)
- Communication Baud rate: Up to 1.25 Mbps
- User control: Handled via Vectrino II configuration and collection software
- Synchronization: SynchIn and SyncOut
Other:
- DC Input: 12–48 VDC
- Peak current: 2.5A at 12VDC (user selectable)
- Max. consumption: 4 W at 100 Hz
- Operating temperature: –4°C to 40°C
- Storage temperature: –15°C to 60°
Options:
- 4-beam down-looking probe. Fixed stem or flexible cable
- 10, 20, 30 or 50 m cable with choice of splashproof or Impulse underwater connector
- RS 485–USB converter (one-to-one, four-to-one or eight-to-one)
- Combined transportation and storage case
 Datasheet
|
|
