|
Vectrino
The Vectrino is a high-resolution acoustic velocimeter used to measure 3D water velocity in a wide variety of applications from the laboratory to the ocean. The basis measurement technology is coherent Doppler processing, which is characterized by accurate data with no appreciable zero offset.
|
|
|
System:
- Acoustic Frequency: 10 MHz
Velocity:
- Velocity range: ±0.01, 0.1, 0.3, 1, 2, 4m/s (user selectable)
- Velocity accuracy: ±0.5% of measured value ±1mm/s
- Sampling Rate: 1–25Hz, 1–200Hz (Vectrino+Firmware)
Sampling Volume:
- Distance from probe: 0.05m
- Diameter: 6mm
- Height (user selectable): 3–15mm
Data Communication:
- I/O: RS232. The software supports most commercially available USB–RS232 converters
- Baud rate: 300–115200
- Analog outputs:3 channels standard, one for each velocity component.
- Synchronization: SynchIn and SynchOut
Other:
- Input Power: 12–48VDC
- Peak current: 2.5A at 12VDC (user selectable)
- Max consumption at 200Hz: 1.5W
- Operating temperature: -5° to 45° C
- Storage temperature: -15° to 60° C
Options:
- Standard or Vectrino+ firmware (upgrade to Vectrino+firmware is also available as retrofit)
- 4-beam down looking probe on 40.cm stem or 4-beam probe on 1m cable.
- 12-pin splash proof or Impulse 12-pin underwater connector
- 10, 20, 30 or 50m cable with choice of splash proof or Impulse underwater connector
- RS232–USB converter (one-to-one, four-to-one or eight-to-one)
- Combined transportation and storage case
 Datasheet
|
|
